Welded-on pieces and sleeves for steel piping
Connecting shaped pieces are made of ASTM A105 steel. They are shaped for immediate welding on a pipe without necessity of any further grinding in a site and they are equpped with two threads: the external thread is used for screwing a flat valve, and the internal thread is used for screwing a plug at the end of the working operation.
In the thickness of the connecting piece / shaped piece, buffer flat is deepened, it ensures perfect tightness of the valve in contact with the O-ring in the lower part of the valve, with possibility of easy manual tightening.
The mentioned system is applied for DN 2"- 2"1/2- 3"- 4"- 5", while for DN 6", the system with a flange is instead of threads. The sealing system against pressure is with O-rings on a flat surface, while flange centering is achieved by a snap system tongue-groove to carry out perfect hole cutting and easy insertion of a threaded plug. To facilitate plug screwing, it is done removing on 360° of the thread beginning with trapezoidal cross-section, both inside the shaped piece, and on the bottom and upper part of the plug, thereby beginning of screwing at the full cross-section is achieved.
for DN 2" - 5" and for PN 5/PN 12
Maximum pressure: 12 bar DN: 2''-5'' Dimensions and weights of fittins DN('')Dimensions (mm)Weight (kg) 2" 88x66x59x17 1.5 2"1/2 102x82x63x21 3 3"… >>
for DN 6''-10'' and PN 5 / PN 12
Maximum pressure: 12 bar DN: 6''-10'' Dimensions and weights of fittins 5bar DN('')Dimensions (mm)Weight (kg) 6" 201x162x75.3x31 11.75 8 251x215x83x26.5 23 10… >>
for DN 12"- DN 20" and PN 5 / PN 12
Maximum pressure: 12 bar DN: 12''-20'' Dimensions and weights of fittins 5bar DN('')Dimensions (mm)Weight (kg) 12 365x320x104x34 55 14 419.5x357x119.5x45 69 16… >>
Maximum pressure: 24 bar DN: 2''-3'' Dimensions and weights of fittins DN('')Dimensions (mm)Weight (kg) 2" 138x70x87x35 6 2"1/2 151x83x55.5x35 7 3"… >>
for DN 6"-20" and for PN 64 bar
Maximum pressure: 64 bar DN: 6''-20'' Dimensions and weights of fittins DN('')Dimensions (mm)Weight (kg) 14 500x670x190x76 260 16 550x770x199.5x76 301 18… >>
fittings for emergency use for steel, cast iron, PVC and PE
Maximum pressure: 12 bar DN: 2''-20'' >>